89YJboss

Hey My 89 YJ has the crappy 3.07 gears in it and i want something slightly better but dont have the money, cuz I dont have a job anymore and i dont have the money for new gears or a SYE, or a CV styel driveshaft, so im trying to work around the shortage of money. So would the gears out of the D30 and D35 of a Cherokee work and fit right in the D30 and D35 in my YJ??? And I know the rear driveshafts in the YJ are pretty short and when lifted up they get to be on a pretty crazy angle, so is the rear driveshaft in a cherokee the same length or is it bigger and longer then the YJ?? And if it is bigger and longer would it bolt right up in my YJ or would it need to be modified?? Im asking because im putting a 3-4inch lift on my YJ and i know the driveshafts are short. Thanks. any help would be great.

__________________
" If Your Not Going To Go through, I Sure As Hell Am "
1989 Jeep Wrangler YJ, Under Construction.

YJWOLF

use a Tcase drop for the driveline bind, and unless you swap in YJ axles with lower geras into your YJ, nothing else will "bolt in". If you take just the gears(which will fit the D35, not D30 cause a YJ is HP.) you still have to have them set-up properly. And if you cant do gears your self, you still have to pay labor, and most shops wont do the job with gears brought in by you.

__________________
95 yj 4.0L 32RH NP231 sye/cv dshaft. Ford 8.8 with super88, HPd30 with AlloyUSA 1 pice axles (760 u-joints) 4.10's ECTED lockers F + R, 35" trxus MT's on ProComp 1079 wheels. rs44044 fronts and rs86211 rears 98" wheelbaseVOTE! VOTE! VOTE!

YJ Dave

A good number of XJ's have a HP D30 up front, thors gears will work for you.

I have never tried to set up used gears, but I do remember hearing about some things that are diffrent, I just don't recall what they are

__________________

89YJboss

Thanks for the help guys, I guess ill just keep having to save for new gearing. Hope you had a good christmas.

__________________
" If Your Not Going To Go through, I Sure As Hell Am "
1989 Jeep Wrangler YJ, Under Construction.

89YJboss

Ok I've got another question..................the YJ with 4 pissed off squirels in it....doesnt it have 4:10 gears??????? would the 4:10's outta the 4banger YJ work in my YJ since they have the same axles?????

__________________
" If Your Not Going To Go through, I Sure As Hell Am "
1989 Jeep Wrangler YJ, Under Construction.

YJWOLF

yes, but just grab the whole axle so you dont need to pull the gears and have them set-up. Remove axle from YJ with 4banger, and bolt them into your YJ.

__________________
95 yj 4.0L 32RH NP231 sye/cv dshaft. Ford 8.8 with super88, HPd30 with AlloyUSA 1 pice axles (760 u-joints) 4.10's ECTED lockers F + R, 35" trxus MT's on ProComp 1079 wheels. rs44044 fronts and rs86211 rears 98" wheelbaseVOTE! VOTE! VOTE!

YJ Dave

Some times you can find the complete axles at "pull and save" parts places for $50 each, just watch for there specials.

And yes the 4 bangers do have 4.10's

__________________

Joker®

4 Banger YJs with manual trannys have 4.10 gears, the auto tranny 4 Banger YJs have 3.73 gears.

__________________
'95 YJ Rio Grande 4 Banger w/auto tranny, 4.0L TB w/1¼"spacer, 4" HellCreek lift + 1¼" shackle lift, 33x12.50/15 Aurora RT-02 skins on AR Outlaw 1s plus other bells & whistles.

89YJboss

Thanks for the help guys......I guess ill be making my rounds to the scrap yard this weekend.

__________________
" If Your Not Going To Go through, I Sure As Hell Am "
1989 Jeep Wrangler YJ, Under Construction.

Jeeper73

davet1960

I put a set of FORD 9" in my CJ5, trick is finding a set out of an old bronco. Fairly straight forward and indestructable, I ran 44X17.5X15's on this 350 powered pig, and never busted and axle, u joint, or tore up a differential, I did go through drive shafts until I built a set out of sch.40 S.S.

Wrangler94

i have a set of 89 YJ axles with 4.10 gears and lockers front and rear. i know it's a drive but if you want them we could meet halfway or something. ask endlessmtnfab, jeffsjeep04, or CIA about long drives for parts

__________________

fireman299

i have a set of 89 YJ axles with 4.10 gears and lockers front and rear.



do you want to sale the front locker? or do u know anybody who does?

C_I_A03

wow, there's a can o' worms we dont' wanna open. we'll leave jeff and his sheep alone.

89YJ, being in Canada, if you look around you might find a couple of 95 YJ's that will have a 44 rear. In canada (I remember from when I bought my first YJ) the 44 came as a rear axle, but only for that year. I don't remember what package (if it was specific) or how rare they are, but look for them, and IIRC they came w/ 4.10's, but I'm not quite positive on the gearing. Check it out though and good luck.

steve

__________________
Your friend in the South,
Stephen
95 YJ Ain't gonna be stock for long....

Jeepnmud74

We have been to Kentucky for wheels and tires for my Dually

Maryland for matching dana 60's for my bud's CJ7

Virgina for the truck that had my current project axles in it

Pennsylvania for a front dana 60 that we really have no clue what it will be used for

Alabama for a set of H@ wheels and tires for my buddy's CJ7.

My buiness card reads "need Jeep parts and will travel".

__________________
Lee

94 YJ, 2" BDS Suspension Lift, 3" Body Lift, 1" Lift Shackles, 33 Tires, 3.73 Gears, Super Dana 35 kit, Detroit Locker rear, ez locker Front, 9000 LB winch
1948 CJ-2A